26
3.2.3 Working with extended excavator shovel (Version 2)
Figure 6: Working with extended excavator shovel (Version 2)
When working with extended excavator shovel the shovel joint must
no longer be rotated after the alignment (see Figure 6).
It is recommended to mark the shovel position or adjust the shovel
full extended in order to have a reference point in case of accidental
change.
The shovel tip/blade serves as reference point for later initial meas-
urement (see Section 3.2.6).
Note:
The TBE-12N may only be used in combination with a tilt rotator
when the orientation of the tilt rotator is not changed.
