22
Use
3.
3.1 Normal / Grading work
3.1.1 General
Figure 3: Grading work installation
The slope compensation cannot be used for work where the com-
plete laser receipt range of 360° is required.
This is the case, for example, for grading work or also for control
measurements during excavation work where the TBE-12N is at-
tached to the shovel. The shovel or the receiver must be as vertical
as possible at this. This is indicated by the vertical LED display
(Figure 1).
3.1.2 Setup
Normal / Grading work is factory-set as default and can be recog-
nised by the “000” indication (Figure 1).
The following tasks only need to be carried out when the factory
setting needs to be modified.
