• Ensure the mains supply is switched off and the circuit
supply fuses are removed or the circuit breaker turned off.
• An isolating switch should be installed to enable the power
to be switched ON and OFF to the luminaire. This allows the
unit to be easily switched OFF for maintenance purposes.
3
5. Installation
• Remove the wall plate from the light fitting, by removing the
two nuts.
• Avoid positioning the luminaire near any sources of heat in
and around the detection area such as extractor fans,
tumble dryers or boiler exhauhsts etc. This would also include
other light sources such as secuirty lights.
• Reflective surfaces (i.e. pools of water, white painted walls,
overhanging branches and other types of foliage) may cause
false activation under heightened weather conditions.
• During extreme weather conditions the PIR may exhibit
unusual behaviour. Once normal weather resumes, the PIR
will carryout normal operations.
