IPsecure Interface KNX
Commissioning
22
3.2
Parameters
This chapter describes the parameters of the IPsecure Interface using the parameter windows.
Parameter window
IP settings
All parameters for the device are set in the Properties window of ETS.
Note
The device name, IP address and tunneling servers are set in the Properties window of ETS.
The IP parameters (device name, assignment of the IP address by DHCP or static) are configured in the Properties
window of ETS.
The device name can be entered in the
Settings
Properties window. The device name loaded into the device can be
changed in the
Name
field. The device name is used for identification of the device on LAN. After a search query,
e.g. by ETS, every KNXnet/IP device reports its name and can be allocated accordingly. For example, the
installation location can be identified by the names assigned to the devices, e.g.IP Interface, HALL, SUB7, etc.
Note
The default device name on delivery is "IPsecure Interface". After the first download, the device name entered
in the Properties window of ETS is loaded into the device.
Caution
Only the first 30 characters of the device name are loaded into the device; the rest is truncated.
IPsecure Interface KNX
