Manual DALI button interface TA 4 S DALI-2
3
1
General
1.1
Safety information
ATTENTION
Installation should only be carried out by a qualified electrician!
1.2
Proper use
The DALI button interface TA 4 S DALI-2 is a compact DALI-2 controller with 4 inputs for
connecting potential-free buttons and 2 inputs for connecting variable resistors, e.g. sliders,
potentiometers or various Theben temperature sensors. It can be easily installed in flush-
mounted boxes and is intended for indoor installation.
TA 4 S DALI-2 is exclusively intended for use as contractually agreed between the manufacturer
and the user. Any other use is considered to be unacceptable. The manufacturer does not accept
liability for any resulting damages.
1.3
Explanation of terms
The TA 4 S DALI-2 DALI button interface is a push button processing unit of an input control
device according to standard IEC 62386 Part 301 as well as an absolute input device according
to standard IEC 62386 Part 302 and DiiA Guidelines "Clarifications & Recommendations for IEC
62386" Version 1.2, April 2020.
The term push button processing unit of an input control device is used in this document in the
English spelling "push button input device", absolute input device as "absolute input device"
and short address as "short address".
