Theatrelight CUEMASTER Quick Operation Download Page 18

Page: 18 / 94

CUEMASTER OPERATION

DESK LIGHTS

The Cuemaster is fitted with sockets for Littlite or similar BNC goose-neck working lights. Please note the following points:

The bulbs specified for use in the worklights fittings are 24 Volt, 2.8 Watts, Lucas LLB 865 or equivalent, and are easily obtainable at any
automotive electrical supply house.

If you attempt to use bulbs of a lower voltage, or higher wattage than that specified, the worklight fuse on the back panel may blow.

SYMBOLS USED IN THIS MANUAL

Press the indicated

key once and then

release it

Hold down the indicated

key and keep it held down

for the following operation

LED is on

Move the indicated

fader in the direction

of the arrow

LED

be On

before starting the

operation

MUST

Summary of Contents for CUEMASTER































































































Search results

Summary of Contents for CUEMASTER

Reviews:

Related manuals for CUEMASTER

Brands by name

Popular brands

Theatrelight CUEMASTER, Quick Operation

Search results

Summary of Contents for CUEMASTER

Reviews:

Related manuals for CUEMASTER

Brands by name

Popular brands