THE WORLD MODELS Extra 300 EP Instruction Manual Download

Page: 1 / 16

E252XMPO26401107

Warning! This model is not a toy.

It is designed for maximum performance. Please seek advice if one is not familiar with this kind

of electric powered precision model. Operating this model without prior preparation may cause

injuries. Remember, safety is the most important thing. Always keep this instruction manual at

hand for quick reference.

Wing Span
Wing Area
Flying Weight
Fuselage Length

40.5 in / 1030 mm
288 sq in / 18.6 sq dm
26.5 oz / 750 g
34.5 in / 880 mm

Specifications

*Specifications are subject to change without notice.*

INSTRUCTION MANUAL

Requires : 4-channel radio w/ 4 micro servos,
                  Outrunner Motor w/ Propeller Adaptor
                  20A Brushless ESC, 3 cells 11.1V
                  2100mAh Li - Po battery & charger.

FACTORY PRE-FABRICATED

ALMOST-READY-TO-FLY (ARF) SERIES

MADE IN CHINA

The World Models

Manufacturing Co., LTD.

www.theworldmodels.com

Summary of Contents for Extra 300 EP

















Search results

Summary of Contents for Extra 300 EP

Reviews:

Related manuals for Extra 300 EP

Brands by name

Popular brands

THE WORLD MODELS Extra 300 EP, Instruction Manual

Search results

Summary of Contents for Extra 300 EP

Reviews:

Related manuals for Extra 300 EP

Brands by name

Popular brands