SMK480M
www.singingmachine.com/kids
The Singing Machine® is a registered trademark of The Singing Machine Co., Inc.
The Singing Machine Company, Inc.
4060 E Jurupa Street, Unit B
Ontario, CA 91761-1413 USA
Copyright © 2017 All Rights Reserved.
PRINTED IN CHINA
480M-1702-ENG02
Line in Cable
Manual
Please make sure that the following items are included.
Included
Play / Pair button
Record button
Record
indicator
button
Volume -
button
Handle
Song 1 - 3
button
Effect 1 - 3
button
RECORD
PLAY/PAIR
VOLUME
1
2
3
+
-
1
2
3
SONG
EFFECT
INSTRUCTION MANUAL
Warnings
DANGEROUS VOLTAGE:
The lightning flash
with arrowhead symbol within an equilateral
triangle is intended to alert the user to the
presence of uninsulated dangerous voltage
within the product’s enclosure that may be
of sufficient magnitude to constitute a risk of
electric shock to persons.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
WARNING: CHOKING HAZARD- Small parts.
Not for children
under 36 months.
ATTENTION:
The exclamation point within
an equilateral triangle is intended to alert the
user to the presence of important operating
and maintenance (servicing) instructions in the
literature accompanying this product.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Important Safety Information
FCC WARNING:
This equipment may generate or use radio frequency
energy. Changes or modifications to this equipment may cause harmful
interference unless the modifications are expressly approved in the
instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The rating information is located at the bottom of the unit.
INDUSTRY CANADA NOTICE:
This device complies with Industry Canada Iicense-exempt RSS
standard(s). Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that
may cause undesired operation of the device.
CAN ICES-3(B)/NMB-3(B)
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The Caution marking is located on the bottom panel.
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all Instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance
with the Manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are
provided for your safety. When the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
15. WARNING: To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture. Do not place objects
filled with water, such as a vase, on the apparatus.
16. The AC mains plug is used as the power disconnect device and it
should remain readily accessible and operable during intended use.
In order to completely disconnect the apparatus from power, the
mains plug should be completely removed from the AC outlet
socket.
17. CAUTION: To reduce the risk of fire or explosion, do not expose
batteries to excessive heat such as sunshine, fire or other heat
sources.
DRIPPING WARNING:
This product shall not be exposed to
dripping or splashing, and no objects filled with liquids, such as
vases, shall be placed on the product.
VENTILATION WARNING:
The normal ventilation of the product
shall not be impeded for intended use.
Warnings:
Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority
to operate the equipment.
Class II equipment symbol.
This symbol indicates that the unit has a double
insulation system.
Specifications
AUDIO SECTION
Output Power .................................................................................................................. 1 Watts (RMS)
Output Impedance........................................................................................................................ 4 Ohms
BLUETOOTH
Bluetooth Version.................................................................................................................................V4.1
Working Distance ............................................................ Up to 10 meters measured in open space
LINE IN SECTION
..............................................................................
3.5 mm Stereo line in jack
MICROPHONE SECTION ................................................................ 3.5mm Condensor Microphone
POWER SECTION
Battery .................................................. DC4.5V (”AA” cell 1.5V x 3pcs) (batteries not included)
Power Adaptor................................................................................
Input AC 100-240V ~ 50/60Hz
......................................................................... Output DC 5V 0.6A (Positive Center)
DIMENSION
.................................................... 10.4 X 6.7 X 3.3 inches/ 26.4 X 17.0 X 8.4 cm
WEIGHT
...................................................................................................................
1.5 lbs/0.66 kg
Specifications are subject to change without notice.
Please retain the instructions for further reference, as they contain important information.
Troubleshooting Guide
Should this unit exhibit a problem, check the following before seeking service:
No Power
• Power is not on; press the
POWER
button
to turn power on.
• Confirm that the batteries are installed correctly.
No Sound – General
• Volume is set to minimum; raise volume by pressing
button.
• If using an external audio device, raise the volume on the device.
• Check if the
LINE IN jack
is still connected by a cable.
No sound from the microphone
• Make sure the microphone is firmly connected to the
Microphone jack.
• Make sure the
Mic Guy
microphone is not sitting on the platform.
• Volume is set to minimum; raise volume by pressing
button
Bluetooth reception failure
• Put the external BT device close to the unit.
• Pair the unit with the BT Device as the procedures stated in this manual.
Power
button
Power
indicator
Play / Pair indicator
Please retain this sheet as it contain important notes.
