manualshive.com logo in svg

The Original ScrapBox Ultimate Sewing Box, Assembly Instructions Manual

Share
Download
The Original ScrapBox Ultimate Sewing Box Assembly Instructions Manual Download Page 1

https://www.theoriginalscrapbox.com/pages/sewsteady-link

 

We’ve been working hard to bring you a more customer friendly build in 2018
and we need your feedback. After assembling your Ultimate Sewing Box,  please
email us about your experience at 

[email protected]

. 

For this build, there is no companion video tutorial. 

 

 

We have also partnered with Sew Steady to improve the functionality of our product. 
For your free Center Desk Acrylic Table Insert, please complete the online form
found here (case sensitive):

If you have questions regarding your Ultimate Sewing Box, please contact us.  

USA/CAN 

(801) 226-2686, M-F 9am-5pm MST (Utah) 

 

[email protected]

www.theoriginalscrapbox.com

You have received The Ultimate Sewing Box!

Thank you for your continued interest in our products.
We hope The Ultimate Sewing Box will provide a place to organize and create. 

- The Original ScrapBox Team

AUS #: 61-4-1-4441-8022

GER #: 49-40-57-00-39-98

Congratulations

Summary of Contents for Ultimate Sewing Box




































Reviews:

No comments

Brands by name

Popular brands

Load more brands