DOCUMENT No.:
REVISION: 1.2
DATE: 2014/11/10
DC-MAM-001-X-C-2
Page 299
12.2
SAFETY HARNESSES
The aircraft is fitted with an inertial-reel lap and diagonal strap safety belt-for each front seat
occupant and a lap strap for each rear seat occupant
.
12.2.1 REMOVAL / INSTALLATION OF FRONT OCCUPANT SAFETY HARNESS(ES)
TOOLS / EQUIPMENT REQUIRED
ITEM
QUANTITY
NOTES
1
3.2 mm Metal drill bit+ drive.
1 Set
Removal.
2
17 mm Spanner.
2
3
7/16 Spanner.
2
4
2.5 mm Allen key / hex drive.
1
5
2 mm Allen key / hex drive.
1
6
Blind rivet tool.
1
Installation.
The above list is not necessarily a complete list of all required tools and equipment needed. A calibrated torque
wrench (with adequate range) and the correct size (as implied by the above tool list) accessories (sockets etc.)
are implied for torqueing bolts / nuts, if applicable. Refer to paragraph 1.5 for torque values.
CONSUMABLE MATERIAL REQUIRED
ITEM
QUANTITY
NOTES
1
Aluminium blind rivets (3.2 mm) (multigrip)
As needed.
Installation only.
2
Loctite 222.
As needed.
Inspection panel / fairing screws.
The above list is not necessarily a complete list of all material needed. Refer to the Sling 4 construction manual.
AUTHORISED PERSONNEL
Any person performing maintenance of any kind on the aircraft or any component thereof must do so in
accordance with national legislation. This is the responsibility of the aircraft owner and any person who is to
perform any maintenance on the aircraft.
CAUTION
BE PREPARED WITH A HELPER OR SUPPORT STAND TO HANDLE THE WEIGHT
AND / OR AWKWARDNESS OF THE OBJECT (SEAT) TO BE REMOVED / INSTALLED.
Summary of Contents for Sling 4
Page 1: ......