DOCUMENT No.:
REVISION: 1.2
DATE: 2014/11/10
DC-MAM-001-X-C-2
Page 272
9.3
BRAKE DISC REPLACEMENT
TOOLS / EQUIPMENT REQUIRED
ITEM
QUANTITY
NOTES
1
4 mm Allen key / hex drive.
1
The above list is not necessarily a complete list of all required tools and equipment needed. A calibrated torque
wrench (with adequate range) and the correct size (as implied by the above tool list) accessories (sockets etc.)
are implied for torqueing bolts / nuts, if applicable. Refer to paragraph 1.5 for torque values.
AUTHORISED PERSONNEL
Any person performing maintenance of any kind on the aircraft or any component thereof must do so in
accordance with national legislation. This is the responsibility of the aircraft owner and any person who is to
perform any maintenance on the aircraft.
PROCEDURE (REMOVAL)
Retain any bolts, nuts (except lock-nuts) spacers, screws and washers (with the exception of lock-
washers) for reassembly.
1.
Remove the main wheel (refer to paragraph 4.4.1.2).
2.
Unfasten the button head screws retaining the brake disc to the wheel assembly and
remove the brake disc.
PROCEDURE (INSTALLATION)
1.
Reverse the above procedure (removal) for installation, paying close attention to the
following:
Inspect all bolts and / or screws for damage. Replace if necessary.
Inspect the brake disc for damage and / or cracks before fitment.
2.
Before flight, verify correct operation of the brake mechanism and function.
Summary of Contents for Sling 4
Page 1: ......
