DOCUMENT No.:
REVISION: 1.2
DATE: 2014/11/10
DC-MAM-001-X-C-2
Page 158
4.4.1.6
MAIN GEAR REMOVAL / INSTALLATION
TOOLS / EQUIPMENT REQUIRED
ITEM
QUANTITY
NOTES
1
1 x 4 mm and 1 x 3.2 mm Drill bits with driver (electric
or hand drill).
1 Set
Removal.
2 17 mm Spanner.
1
3 8 mm Allen key.
1
4 7/16 Spanner.
1
5 2 mm Allen key / hex drive.
1
6 Blind rivet tool.
1
Installation.
7 Calibrated torque wrench with at least 25 Nm range.
1
Installation.
8 17 mm Hex socket.
1
To fit item 7.
CONSUMABLE MATERIAL REQUIRED
ITEM
QUANTITY
NOTES
1 Orange paint.
As needed.
2 Loctite 222.
As needed.
Inspection panel screws.
3 4 mm x 10 mm Aluminium blind rivets (multi-grip).
As needed.
Undercarriage
channel
cover
plate.
4 3.2 mm x 8 mm Aluminium blind rivets (multi-grip).
As needed.
Undercarriage channel cover
plate.
5 Glue (PRATLEY QUICKSET CLEAR)
As needed.
To
glue
brake
line(s)
into
undercarriage leg groove. Mix
glue according to manufacturer
instructions.
5 Loctite 577.
As needed.
Brake line fittings.
The above list is not necessarily a complete list of all material needed. Refer to the Sling 4 construction manual.
AUTHORISED PERSONNEL
Any person performing maintenance of any kind on the aircraft or any component thereof must do so in
accordance with national legislation. This is the responsibility of the aircraft owner and any person who is to
perform any maintenance on the aircraft.
CAUTION
BE PREPARED WITH A HELPER OR SUPPORT STAND TO HANDLE THE WEIGHT
AND / OR AWKWARDNESS OF THE OBJECT TO BE REMOVED / INSTALLED.
Summary of Contents for Sling 4
Page 1: ......
