Airplane Factory SLING LSA
Pilot Operating Handbook
Page | 7-32
Date of Issue: 07 July 2014
Revision : 1.3
7.22
Position, anti-collision, taxi and landing lights
The aircraft is equipped with a landing light and taxi light in each wing
leading edge. Each pair of landing lights is activated by a switch (labeled
LAND) located on the instrument panel. Likewise each pair of taxi lights is
activated by a switch (labeled TAXI) located on the instrument panel.
Combination navigation / position lights (red, green and white) and anti-
collision lights (white) are fitted to the wing tips, in the standard
configuration (red left, green right). A combination position / anti-collision
light (white) is fitted on top of the rudder.
The white lights on the wingtips and rudder are dual function lights that
can either be on continuously (position light), flash (anti-collision / strobe
light) or flash at a higher brightness level superimposed on continuous
operation (i.e. combination position and anti-collision / strobe light).
Position and anti-collision light functioning is dependent upon switch
selection:
SWITCH
RED AND GREEN
WINGTIP LIGHTS
WHITE WINGTIP
LIGHTS
WHITE LIGHT
ON RUDDER
NAV STROBE
ON
OFF
On (continuous
illumination)
On (continuous
illumination)
Off
OFF
ON
Off
On (flashing)
On (flashing)
ON
ON
On (continuous
illumination)
On (continuous
illumination) and
flashing (with
higher intensity)
superimposed on
continuous
illumination.
On (continuous
illumination)
and flashing
(with higher
intensity)
superimposed
on continuous
illumination.
