4-51
User Manual PN 84469 Rev L
Figure 4-38 Settings
Global Navigation Satellite System
Table 4-14 Settings
Global Navigation Satellite System
Section
Value
Global Navigation Satellite System
Enable GNSS
Select Disable or
Enable
.
(Enable
is the default setting) When the
setting is changed, the system requires a reboot (refer to Figure 4-).
Select Constellations
Select up to three GNSS satellite constellations to receive positioning
and timing data from.
GPS
is the default. When multiple
constellations are chosen, the terminal uses the system with the best
signal for position data.
Note: When BeiDou and GLONASS are both selected, no other
constellations can be selected.
Synchronize Time
Synchronize Time
Synchronize time is only used when the terminal’s system time is
incorrect, GNSS is disabled, and the GNSS cannot be enabled for
security purposes or operational reasons. (Note: When performing a
software upgrade and a failure occurs, synchronizing the terminal’s
time will often solve the problem.)
Summary of Contents for VesseLINK Certus 200
