Thales VesseLINK Certus 200, User Manual

Page: 82 / 131

4-46
User Manual PN 84469 Rev L
Figure 4-36 Settings

Data Screen
Table 4-12 Settings

Data
Section Value
Data Configuration
Data Session Deactivate / Activate (deactivate is the default setting)
Data Route - Primary Select the desired data route ( WAN or Satellite Port) (WAN is the
default setting).
Data Route -
Alternate Select the desired alternate data route. ( Satellite is the default setting)
Note: If Satellite is selected, the available options are WAN Port or
Disabled.
If WAN Port is selected, the available options are Satellite or
Disabled.
Disable Data on Boot NO / YES ( NO is the default setting). Determines the default data
operations state when the system is restarted.
Port Forwarding
Port Forwarding Enter the External Port, Internal Port, Internal IP Address, and
Protocol. Up to seven ports can be forwarded in the range of 1 -
53247. Ports greater than 53247 cannot be forwarded.