Chapter 6: Upgrade and Migration
Migrating from DSM v6.1.0.9229 to DSM 6.4.2
DSM Installation and Configuration Guide
Copyright 2009 - 2020 Thales Group. All rights reserved.
114
Prerequisites
Break up the HA cluster
If your HA cluster is DSM
v6.1.x
or
an earlier version
, then you must break the cluster using the following method:
1. On the initial node, log on to the Management Console as a
System/All administrator
.
2. On the
High Availability
page, select a failover server and click
Cleanup Replication
3. Click
OK
when prompted to proceed with the cleanup.
4. Repeat step
2
and
3
for each failover server.
If you are on a version of DSM that is v6.2 or higher, see
"Upgrading an HA Cluster" on page 142
.
Delete Idle Software
1. Select
System > Software Upgrade
. The Upgrade Software window opens.
2. If two software images are present, click
Delete Idle Version
to delete the version not in use.
Backup current DSM configuration
A wrapper key is required to create a system level backup of the DSM.
1. Log on to the Management Console as a System/All Administrator.
2. Select
System > Wrapper Keys
from the menu bar.
3. On the Wrapper Keys page, select
Operation > Create
, then click
Apply
to create the wrapper key.
4. You will see a confirmation message stating that the key exists. The same confirmation message is also
displayed on the
Manual Backup and Restore
page with a message saying that you can proceed with creating
a backup.
You must export this wrapper key in order to use it,
1. Select
Export
from the
Operation
menu to export key shares.
2. Set a number for both the
Minimum Custodians Needed
and the
Total Number of Custodians
. This setting
splits the wrapper key value among multiple custodians.
o
Minimum value required for Minimum Custodians Needed:
2
o
Maximum value required for Minimum Custodians Needed:
10
o
Minimum value required for Total Number of Custodians:
3
o
Maximum value required for Total Number of Custodians:
10
3. Select the check box next to the DSM administrators who will serve as custodians for the wrapper key shares.
Administrators of type System Administrator and All are listed. Any of these administrators, with the exception of
the default initial log-on administrator
admin
, can be selected as a custodian.
If more than one custodian has been selected, each of them is given a share of the wrapper key. The wrapper key
share is displayed on their Dashboard page when they log into the Management Console. Each administrator
must see a unique wrapper key share displayed on the dashboard beneath the fingerprint for the CA.
4. Click
Apply
on the bottom right hand corner. The generated wrapper key or key shares are exported and is visible
on the Dashboard, beneath the fingerprint for the CA. The
Wrapper Key Share
displayed in the Dashboard
window is a toggle. Click
Show
to display the wrapper key share value. Click
Wrapper Key Share
value to
display the string
Show
.
