
Chapter 4: Testing and Configuration
Figure 5: Serial cable: RJ45 to DB9
If you are using a serial connection, configure your local VT100 or terminal emulator settings as follows:
Speed (bits per second)
115200
Word length (data bits)
8
Parity
No
Stop bit
1
Power on and Login
Power on the ProtectServer Network HSM and the (optional) monitor. A green LED on the front of the device
will illuminate and the startup messages will be displayed on the monitor:
Welcome to SafeNet Protect Server External II v5.9.0
=====================================================
System is booting, this may take few minutes...
SafeNet Protect Server System boot Successful
If you are using a serial connection, no startup messages are displayed.
Power-up is complete when the login prompt appears:
Protect Server External 5.9.0
PSE-II login:
You can login as
admin
or
pseoperator
to access the PSE shell (PSESH), which provides a CLI for
configuring and managing the appliance. See the
PSESH Command Reference Guide
for command syntax.
The default passwords for the
admin
and
pseoperator
users are:
User name
Default password
admin
password
pseoperator
password
SafeNet ProtectToolkit 5.9 Installation and Configuration Guide
007-013682-007 Rev. A 08 January 2020 Copyright 2009-2020 Thales
21