manualshive.com logo in svg

Thales SafeNet ProtectServer Network HSM 5.9, Installation And Configuration Manual, Page: 14 / 37

Share
Download
Thales SafeNet ProtectServer Network HSM 5.9 Installation And Configuration Manual Download Page 14

Chapter 2:   ProtectServer Network HSM Hardware Installation

ProtectServer Network HSM Required Items

This section provides a list of components that you should have received with your ProtectServer Network HSM
order.

Contents Received

The following table contains the standard items you received with your order:

Qty

Item

1

ProtectServer Network HSM

standalone appliance

1

Smart card reader

2

Smart cards

(in a single media case)

NOTE

Power cables are no longer included with the shipment from our factory. Please

source your power cables locally for the intended deployment destination.

To configure your ProtectServer Network HSM, you will need to supply and connect a
keyboard, mouse, and display monitor. After the appliance is placed into service, the
keyboard, mouse and monitor can be disconnected from the appliance.

Optional Items

The following table describes additional items which you can use with your ProtectServer HSM. Contact your
Thales sales representative to order these items.

SafeNet ProtectToolkit 5.9 Installation and Configuration Guide

007-013682-007 Rev. A 08 January 2020 Copyright 2009-2020 Thales

14

Summary of Contents for SafeNet ProtectServer Network HSM 5.9






































Reviews:

No comments