manualshive.com logo in svg

Thales Mobile Mapper, User Manual

Share
Download
Thales Mobile Mapper User Manual Download Page 7

1

Introduction to the MobileMapper System

The 

MobileMapper

 system from Thales Navigation is com-

posed of two main elements: the 

MobileMapper

 receiver and 

MobileMapper Office

 software running on a PC-type com-

puter.
The 

MobileMapper

 receiver is a handheld navigation and 

positioning device that enables you to describe the features 
being mapped and then format the data so that later it can be 
uploaded to a GIS. It offers an easy-to-use and easy-to-de-
ploy solution for general mapping and for asset manage-
ment.

MobileMapper

 combines all the navigation capabilities of a 

recreational handheld with feature attributing software to 
support GIS data collection in the field.
The 

MobileMapper

 receiver and its main functions are fully 

described in Section 1 in this manual.

MobileMapper Office

 is an office software suite that inter-

faces the 

MobileMapper

 receiver with your GIS system. 

Mo-

bileMapper Office

 allows you to prepare GIS jobs, feature 

libraries and waypoint files, build background maps from 
GIS data files and manage the information logged in the field 
(upload/download functions).
The 

MobileMapper Office

 software and its mains functions 

are fully described in Section 2 in this manual.
All functions relative to data exchange between 

MobileMap-

per

 and 

MobileMapper Office

 are also detailed in Section 2.

Finally, the Appendices section in this manual covers a num-
ber of topics such as product specifications, SD card instal-
lation, connectors & cables and glossary of terms used.

Please note that a printed 

Getting Started Guide

 is included 

in your MobileMapper system. This short, multilingual 
guide, which is presented in a tutorial form, is intended to 
help you complete your first job. Practising with this guide 
will allow you to understand the essentials of the system. 

Summary of Contents for Mobile Mapper

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands