Thales MissionLINK Certus 200, Installation Manual

Page: 38 / 61

2-13
Installation Guide 84465 Rev. H
1. Use the template information provided in Appendix B to create the appropriate hole
pattern in the desired mounting surface for the chosen mounting hardware.
NOTE
Hole sizing and hardware are shown for through hole mounting
as shown in Appendix B. User may mount antenna with other
hardware at their discretion and own risk.
NOTE
TU can be mounted in any orientation but for best performance,
it is recommended that it is mounted horizontally with the
Thales logo facing up. This will give the best protection against
any spills or dripping water and allows for the best heat transfer.
2. Position the pattern to avoid interferences with the antenna or coaxial cable connection to
the antenna.
3. Assemble screws with split lock and flat washers as shown in Figure 2- and torque to 4.5
Ft. Lbs. (6 Nm).
4. Connect the provided Wi-Fi antenna, and install the SIM Card (from service provider)
into slot.
a. Open the SIM Card protective cover by pulling it away from the TU, exposing the
SIM card slot. (Figure 2-).
Figure 2-8 SIM Card with Cover Opened
b. Install SIM card from Air-time provider (1, Figure 2-), by inserting the card with
contacts down (2) until it clicks into place (3).
c. Be sure to engage the lock for the SIM Card (4).