Thales MissionLINK Certus 200, Installation Manual

Page: 21 / 61

1-4
Installation Guide 84465 Rev. H
NOTE
The Indicator Colors are:
Solid Green: Operational
Flashing Green: Start-up or in progress of configuring or acquiring
service.
Solid Red: fault requires user attention (Open
Management Portal
for
Alerts)
Flashing Red: critical fault requiring immediate attention. For
additional information, refer to CHAPTER 3 TROUBLESHOOTING
The TU front panel (left to right) has a main power button, one RJ-14 connector for POTS (Plain
Old Telephone Service) Phone(s), three PoE (Power over Ethernet) RJ-45 connectors for VoIP
phones or Ethernet-based devices, and one WAN (Wide Area Network) connector primarily used
to connect an external cellular modem or VSAT.
Figure 1-4 Terminal Unit (TU) Front Panel Detail