Thales C17004DA02 Component Maintenance Manual With Illustrated Parts List Download

Page: 90 / 102

COMPONENT MAINTENANCE MANUAL

C17004

34-57-96

Page 1004

MAY 30/95

SEXTANT Avionique 1995

(6) Units per Assy

The UNITS PER ASSY column shows the number of parts necessary for the next highter

assembly. For some assemblies or parts, the number is

replaced by the letters RF (for Reference) and AR (As Required).

D. Abbreviations used in the Detailed Parts List

AR:

As Required.

DET:

Detail.

EFF:

Effectivity.

ESDS:

Electrostatic Discharge Sensitive.

LOC:

Location.

NHA:

Next Higher Assembly.

NP:

Not Procurable.

OPT:

Optional.

ORDER OVERLGTH MPN: Order Overlength Manufacturer’s Part Number.

POST SB:

Post Service Bulletin.

PRE SB:

Pre Service Bulletin.

Revised.Lines or pages revised.

RF:

For Reference.

SEL FROM:

Select From.

SUPSD BY:

Superseded By.

SUBSDS:

Supersedes.

The document reference is online, please check the correspondence between the online documentation and the printed version.

Summary of Contents for C17004DA02







































































































Search results

Summary of Contents for C17004DA02

Reviews:

Related manuals for C17004DA02

Brands by name

Popular brands

Thales C17004DA02, Component Maintenance Manual With Illustrated Parts List

Search results

Summary of Contents for C17004DA02

Reviews:

Related manuals for C17004DA02

Brands by name

Popular brands