COMPONENT MAINTENANCE MANUAL
C17004
34-57-96
Page 1001
MAY 30/95
COPYRIGHT
SEXTANT Avionique 1995
c
ILLUSTRATED PARTS LIST
INTRODUCTION
A. General
This ILLUSTRATED PARTS LIST (IPL) is prepared to ATA Specification 100. It
is divided as follows:
- INTRO: Introduction,
- OPT: Otional Parts List,
- VCL: Vendor Code List,
- EDI: Equipment Designator Index,
- NI: Numerical Index (in alphanumeric order),
- Detailed Parts List.
B. Function and Use
The IPL contains a list of all the components used in the equipment. Its
function is to help the procurement of parts and subassemblies. The parts
given in the IPL must be procured by the Part Numbers and from the
manufacturers given in the Parts List. If not, the warranty can be cancelled.
It is possible to identify parts as follows:
(1) From the Manufacturer’s Part Number
Find the related Part Number in the Numerical Index (alpha and num).
The columns to the right give the figure and item number of the part in the Detailed
Parts List.
(2) From the Equipment Designator
Find the equipment designator of the part on the Electrical Diagram.
Then refer to the EDI to find the figure and item number of the part in the Detailed
Parts List.
(3) If the Part Number or Equipment Designator of the Part are not known.
Look for the figure which shows the parts and its item number. Then refer
to the Detailed Parts List to find its Part Number.
C. How to use the Detailed Parts List
The detailed Parts List contains one or more figures which show the main
assemblies of the equipment. Details of the parts are given on the opposite
and subsequent pages.
The list is divided into these columns:
- 1st column: Figure Item - Figure and Item number,
- 2nd column: Part Number - Manufacturer’s Part Number,
- 3rd column: Airline Stock Number,
- 4th column: Nomenclature,
- 5th column: Effectivity Code,
- 6th column: Units per assy - Quantity for the next higher assembly.
The document reference is online, please check the correspondence between the online documentation and the printed version.
