IOM CRUZcontrol® Generation2 for NBC
P/N: 1118211
Revision Date: 05/31/2019
Page
5
of
66
Chapter 1: IOM
I
NTRODUCTION
IOM Purpose
It is the intent of TGW Systems, through this
manual, to provide information that acts as a
guide in the installation, operation, and
maintenance of TGW Systems conveyors.
This manual describes basic installation
practices, assembly arrangements, preventive
maintenance, and assists in replacement parts
identification.
This service manual is intended for use by
personnel who are knowledgeable of installation
and safe working practices on conveyor systems.
Not all applications and conditions can be
covered; therefore, this manual is to be used
ONLY as a guide.
If additional copies of this manual are needed or
if you have any question concerning the
conveyor please contact your TGW Distributor or
TGW Lifetime Services at 231-798-4547 or visit
videos and other application information.
Manual Structure
You s h o u l d receive a separate
documentation for each product line of TGW
Systems implemented in your installation. You
can identify the respective product line on the
back of the folder or on the cover sheet of the
IOM (Installation Operation Maintenance Manual)
•
Pay attention to the safety
instructions!
•
Prior to working at or in the
immediate vicinity of the system, it is
recommended that you make
yourself familiar with the safety
instructions included in the present
document!
WARNING
