Textron Jacobsen SLF530, Repair Manual

Page: 39 / 352

ENGINE
673831-Rev A 3-13
3
Engine
Removal and Installation
See Figures 3-15 through 3-21.
NOTE
1. Park the mower safely. (See “Park Mower Safely” on
page 1-6.)
2. Allow engine to cool completely.
3. Disconnect battery negative (–) cable at battery.
4. Drain engine oil.
5. Remove the hood. (See “Hood” on page 9-4.)
6. Remove the hydraulic tank. (See “Hydraulic Oil Tank”
on page 6-62.)
7. Remove radiator/hydraulic oil cooler. (See
“Radiator/Hydraulic Oil Cooler Assembly” on
page 3-
8 .)
8 . Remove muffler and exhaust assembly. (See “Muffler
and Exhaust Assembly” on page 3-7.)
9. Remove fuel filters. (See “Fuel Filters” on page 3-11.)
10. Remove fuel pump. (See “Fuel Pump” on page 3-12.)
11. Remove remote oil filter. (See “Remote Oil Filter” on
page 3-12.)
12. Remove hydraulic gear pump. (See “Gear Pump” on
page 6-49.)
13. Remove hydraulic traction pump. (See “Traction
Pump” on page 5-40.)
Figure 3-15
NOTE
Cover the opening on the intake manifold to prevent
debris from entering the engine.
14. Loosen hose clamp (1) and disconnect hose (2) from
intake manifold.
Figure 3-16
15. Remove screw (3), three flat washers (4) and nut (5).
16. Disconnect the throttle cable (6) from the engine
bracket.
Figure 3-17
NOTE
Label all hoses before removing to ensure correct
installation.
17. Disconnect outlet hose (7) and return hose ( 8 ) from
remote oil filter adapter.
1 8 . Remove return hose ( 8 ) from clamp (9)
1
2
MAR0257
3
4
4
5
6
MAR0256
7
8
9
MAR0253