Greenlee / A Textron Company
5
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
HPB55 Series Hydraulic Paving Breaker
IMPORTANT SAFETY INFORMATION
• Do not operate the breaker unless the bit is
properly installed and placed against the work
surface. Damage to the breaker can result.
• Inspect the hydraulic hoses and couplings
every operating day. Repair or replace if
leakage, cracking, wear or damage is evident.
Damaged hoses or couplings can fail, resulting
in injury or property damage.
• Use this tool for manufacturer’s intended
purpose only. Use other than that which is
described in this manual can result in injury or
property damage.
• Make sure all bystanders are clear of the work
area when handling, starting, and operating the
tool. Nearby personnel can be injured by flying
or falling debris or by flying parts in the event of
a tool malfunction.
Hydraulic oil can cause skin irritation.
• Handle the tool and hoses with care to prevent
skin contact with hydraulic oil.
• In case of accidental skin contact with hydraulic
oil, wash the affected area immediately to
remove the oil.
Failure to observe these precautions may result
in injury.
Emergency stop procedure:
1. Release the trigger.
2. Shut off the hydraulic power source.
Procedure for connecting or disconnecting
hydraulic hoses, fittings or components:
1. Move the flow lever on the power source to
the OFF position.
2. Stop the hydraulic power source.
3. Follow the sequence under “Hose
Connections” to prevent pressure buildup.
In case some pressure has built up, loosen
hoses, fittings or components slowly.
Note: Keep decals clean and legible. Replace decals
when necessary.
