background image

Greenlee / A Textron Company

 

2

 

4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070

HPB55 Series Hydraulic Paving Breaker

Table of Contents

Description ..................................................................2
Safety ..........................................................................2
Purpose of this Manual ...............................................2
Other Publications .......................................................2
Important Safety Information .................................. 3–5
Identification ................................................................6
Specifications .......................................................... 7–8
Hoses and Fittings ......................................................9
Hose Connections .......................................................9
Typical Setup ...............................................................9
Setup .........................................................................10
Operation ...................................................................10
Maintenance ........................................................ 10–11
Troubleshooting .........................................................12
Illustrations and Parts Lists ................................. 13–16
Accessories ...............................................................17

KEEP THIS MANUAL

Description

The HPB55 Series Greenlee Utility Paving Breaker is 

intended to break up asphalt, concrete, and hard clay.
The HPB55 breaker is provided with vibration-

 dampened  handles.

Safety

Safety is essential in the use and maintenance of 

Greenlee Utility tools and equipment. This manual 

and any markings on the tool provide information for 

avoiding hazards and unsafe practices related to the 

use of this tool. Observe all of the safety information 

 provided.

Purpose of this Manual

This manual is intended to familiarize personnel with  

the safe operation and maintenance procedures for 

the following Greenlee Utility Paving Breakers:
•  HPB55-1AVS  1-1/8" x 6" shank with  

 

dampening handles

•  HPB55-2AVS  1-1/4" x 6" shank with  

 

dampening handles

Keep this manual available to all personnel.
Replacement manuals are available upon request at  

no charge at www.greenlee.com.

Other Publications 

Tool Owners/Users

SAE Standard J1273 (Hose and Hose Assemblies): 

Publication 99930323

Authorized Greenlee Utility Service Centers

Service Manual:  Publication 52042951

All specifications are nominal and may change as design 

improvements occur. Greenlee Textron Inc. shall not be liable for 

damages resulting from misapplication or misuse of its products.

Summary of Contents for Greenlee HPB55 Series



















Reviews: