background image

EHP700L Battery-powered Pump

Greenlee / A Textron Company

4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070

5

IMPORTANT SAFETY INFORMATION

Cutting hazard:
•  Remove battery before changing 

dies, adapters, or jaws.

•  Keep hands away from the head 

when in operation.

Failure to observe these warnings 

could result in severe injury or death.

Do not dispose of batteries in a fire. They will vent 

fumes and may explode.
Failure to observe this warning could result in severe 

injury from harmful fumes or burns from flying 

debris.

Inspect tool and blades before use. Replace any 

worn or  damaged parts. A damaged or improp-

erly  assembled tool can break and strike nearby 

personnel. 
Failure to observe this warning could result in severe 

injury or death.

•  Do not use this tool for continuous use. After 100 

cycles, allow the tool to cool for 15 minutes.

•  Do not secure this tool in a vise.
•  This tool may be used in damp or wet environ-

ments; however, air-drying is recommended before 

use if the tool becomes soaked. Damage may 

result when the tool is operated prior to thorough 

drying when electrical components are soaked.

•  Use this tool for the manufacturer’s intended 

purpose only.

Failure to observe these precautions may result in 

injury or property damage.

Do not allow anything to contact the battery 

terminals.
•  Do not immerse the batteries in liquid. Liquid may 

create a short circuit and damage the battery. 

If batteries are immersed, contact your service 

center for proper handling.

•  Do not place the battery into a pocket, tool pouch, 

or tool box with conductive objects. Conductive 

objects may create a short circuit and damage the 

battery.

•  Do not place a battery on moist ground or grass. 

Moisture may create a short circuit and damage 

the battery.

Failure to observe these precautions may result in 

injury or property damage.

•  Do not store the battery at more than 122 °F 

(50 °C) or less than –4 °F (–20 °C). Damage to the 

battery can result.

•  Do not use another manufacturer’s charger. Other 

manufacturers’ chargers may overcharge and 

damage the battery.

•  Do not attempt to open the battery. It contains no 

user-serviceable parts.

Failure to observe these precautions may result in 

injury or property damage.

Use all appropriate and applicable personal safety 

equipment as required such as safety shoes, hard 

hat, and safety glasses. Follow all safety rules and 

regulations for the job.
Failure to comply may result in personal injury or 

property damage.

Do not perform any service or maintenance other 

than as described in this manual. Injury or damage 

to the tool may result.
Failure to observe this precaution may result in injury 

and property damage.

Note:  Keep all decals clean and legible, and replace 

when necessary.

Summary of Contents for Greenlee EHP700L





















Reviews: