EHP700L Battery-powered Pump
Greenlee / A Textron Company
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
2
Description
The Greenlee EHP700L Battery-powered Pump is a
dual-stage pump that develops a maximum of 700 bar
(10,000 psi). This pump is intended to provide hydraulic
power for remote cutting, punching, and crimping tools.
This pump has a factory-set internal pressure relief
valve.
Fill unit with hydraulic oil before
operating pump.
Failure to fill unit with oil will result in
damage to the pump.
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any markings on the tool provide information for
avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information
provided.
Purpose of this Manual
This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
Greenlee EHP700L Battery-powered Pump.
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge at www.greenlee.com.
Do not discard this product or throw away!
For recycling information, go to www.greenlee.com.
All specifications are nominal and may change as design
improvements occur. Greenlee Textron Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
KEEP THIS MANUAL
Table of Contents
Description .................................................................... 2
Safety ............................................................................ 2
Purpose of this Manual ................................................. 2
Important Safety Information .....................................3–5
Identification .................................................................. 6
Specifications ................................................................ 6
Features of the Pump .................................................... 7
Setup ............................................................................. 7
Operation ....................................................................8–9
Maintenance ................................................................ 10
Troubleshooting ........................................................... 11
Illustrations and Parts Lists ....................................12–18
Main ....................................................................12–13
Motor ....................................................................... 13
Release Lever .......................................................... 14
Pump Housing Unit .................................................. 15
Pump Housing Cap Unit .......................................... 15
Pump Housing Cap ................................................. 15
Relief Valve .............................................................. 16
Piston Pump ............................................................ 16
Reservoir Assembly ................................................. 17
Battery Plate ............................................................ 17
Control Unit .............................................................. 18
