27
Steps
1.
Press the UTILITY key on the front
panel when the tester is in EDIT status.
The display will go from the normal
EDIT status to the MANU Utility menu
for
the current test
.
UTILITY
L I T Y
I
M A U
N
U T
2
M A N U = * * * - 0 0
A R C M D E : O
O
F
F
G R O U N D M O D E :
N
O
P A S S H
L D :
O
O F
F
F A I L M D E :
O
P
S T O
M A X H O L D : O F F
Note
The MANU UTILITY settings only apply to the selected
MANU test.
2.
Use the UP/DOWN arrow keys to move
to the PASS HOLD setting.
3.
Use the scroll wheel to set PASS
HOLD.
PASS HOLD OFF, ON
4.
Press the EDIT/SAVE key to save and
exit the MANU Utility menu.
EDIT/SAVE
Note
The ESC key can be pressed at any time in the MANU
Utility menu to cancel and exit.
2.3.13 Setting FAIL MODE
Background
The FAIL MODE settings only apply to the selected test in
AUTO tests.
FAIL MODE has three options, CONTINUE, HOLD and
STOP.
When FAIL MODE is set to CONTINUE the tester will
continue testing after a FAIL judgment.
When set to HOLD, the tester will hold the test on a FAIL
judgment, and then continue testing after the START key
is pressed.
The STOP mode will completely stop the test after a FAIL
judgment.
Note
The FAIL MODE setting only applies to AUTO tests. This
setting is ignored when running MANU tests.