5-5. Memory Function
5-5-1. Storing and recalling preset voltage/current data
●
Storing preset data
Operation procedure
1. Set the voltage and current values, following the
steps described in
“5-3-1. Voltage setting procedure”
“5-3-2. Current setting procedure”
Press the ENTER/MEM key.
PRESET keys 1 to 3 all blink green.
2. Press the PRESET key (1, 2, or 3) where you
want to store the set value.
The PRESET key you pressed lights in green.
The voltage and current values are stored in the
selected PRESET key.
※
To cancel storing the set values, press the
ENTER/MEM key again while PRESET keys
1 to 3 are all blinking green.
●
Recalling preset data
Operation procedure
1. Press a PRESET key (1, 2, or 3) to recall the
voltage and current values stored in that key.
21
21
