11-3-24. Output setting when the power is turned on (PONOUT)
is turned on.
he output when the power is
This command sets and queries the output setting for when the power
Setting
PONOUT x1
x1: Specifies whether to turn on t
turned on.
0: Output is not turned on.
1: Output is turned on.
Application example
d on.
PONOUT 1
Turns the output on when the power is turne
Query PONOUT? Queries
the output on setting for when the power is turned on.
Response example
ONOUT 1
hen the power is turned on.
P
Indicates the output is turned on w
Remarks
11-3-25. Main relay setting when the power is turned on (PONPOW)
lay setting for when the power is turned on.
OW x1
rn on the main relay when the power is
relay is not turned on.
1: Main relay is turned on.
This command sets and queries the main re
Setting
PONP
x1: Specifies whether to tu
turned on.
0: Main
Application example PONPOW 1
Turns on the main relay when the power is turned on.
Query
PONPOW?
Queries the main relay setting for when the power is turned on.
Response example PONPOW 1
Indicates the main relay is turned on when the power is turned
on.
Remarks
11-3-26. Notification setting 1 (MASK)
This command sets and queries the character stri
r alarm notification 1.
ASK x1
x1: Uses an 8 digit combination of 0 and 1 to enable/disable
alarm notification 1.
ng issued fo
M
Setting
MASK xxxxxxx1 :
Enable(1)/disable(0) hardwa
MASK xxxxxx1x :
1xx :
Enable(1)/disable(0) OVP occurrence n
MASK xxxxx
MASK xxxx1xxx :
MASK xxx1xxxx :
MASK xx1xxxxx :
:
xxxx :
re alarm notification.
otification.
error notification.
ror notification.
MASK x1xxxxxx
MASK 1xxx
Enable(1)/disable(0) UVP occurrence notification.
Enable(1)/disable(0) CV/CC mode change notification.
nable(1)/disable(0) co
E
mmand
Enable(1)/disable(0) parameter er
Enable(1)/disable(0) execution error notification.
Enable(1)/disable(0) warning notification.
Application example MASK 00001000
de change notification.
Sends the CV/CC mo
Query
MASK?
Queries the alarm notification setting.
Response example
MASK 00001000
Alarm notification is issued when CV/CC mode is changed.
T
s
he message issued conta
y the
ystem address (%1) of the unit on which the alarm occurred, and the alarm type.
The default setting is 00000000.
ins a header to identify the unit on the local bus, followed b
Remarks
Hardware alarm
ALARM %1,1
OVP occurrence
ALARM %1,3
UVP occurrence
CV mode
Æ
CC mode
CC mode
Æ
CV mode
Command error
Parameter error
Execution error
rror
SR
Warning e
ALARM %1,2
CC %1,0
SRCC %1,1
ERROR %1,1
ERROR %1,2
ERROR %1,3
ERROR %1,4
90
90
