TEXIO LSG SERIES, Instruction Manual

Page: 93 / 167

81
4.
When a normal sequence/chain is running, the
screen displays which sequence, step and loop
are currently active.
Sequences can be paused by pressing
Pause[F1] and resumed again by pressing
Continue[F1].
If no steps have been crea
ted “No
N.Seq.” will be displayed on the screen.
“Sequence Complete ” will be displayed at the
end of the sequence.
Display:
Sequence/Chain
Running
Continue
NSEQ RS232
31/Oct/2013
Run N.Seq.
0.000
V
0.000
A
0.00
w
Step
Seq. No: 01
Loop: 0001
0003
3-3-5. Fast Sequence Overview
Description A fast sequence is comprised of a user-defined
number of steps that can be executed at a high
frequency. Unlike normal sequences, each step
in a fast sequence has the same execution time
(time base).

This mode is only available for CC and CR
mode.

Up to 1000 discrete steps can be configured
using fast sequences.

Each fast sequence can have a memo note
attached to it.

Fast Sequences can be looped up to 9999
discrete times or for an infinite amount of
times.

Fast sequences can be configured to hold a
set current or resistance at the end of the load.

No ramping function can be used with the Fast
Sequence function.