TEXIO LSG SERIES, Instruction Manual

Page: 63 / 167

51
2-5-5. OVP
Description If the OVP is tripped, the LSG Series will turn off
the load. The OVP levels can be set from 0V to
10% higher than the rating voltage.
Operation
1.
Press
Main
> Configure[F5] > Protection[F1]
and set the OVP Level .
Range:
OVP Level: OFF, 0~Rating v 10%
Note: To turn OVP off, set the OVP voltage
greater than the current rating v 10%.
Display
2.596
V
500.06
mA
1.2982
w
CV B Value 15.000
CV A Value 15.000
LOAD RS232
A Value
Fine
03/09/12
V
V
OVP Alarm
Please Press Enter
To Clear Alarm
OVP
OVP indicator
Alarm message
when OVP is
tripped
Mode
CV
I Range
L 0.7A
V Range
L 15V
Response
Fast
Configure
2-5-6. UnReg
Description The UnReg error message will appear on the
display when the electronic load is operating in
an unregulated state.
Alarm

The UnReg indicator will appear on the display
when the set load is inadequate for the source.

To clear the UnReg indicator, increase the load
or reduce the load requirements.
Display
2.596
V
500.06
mA
1.2982
w
CV B Value 15.000
CV A Value 15.000
LOAD RS232
A Value
Fine
31/Oct/2013
V
V
UnReg
UnReg indicator
Mode
CV
I Range
L 0.7A
V Range
L 15V
Response
Fast
Configure