TEXIO LSG-1050H, Instruction Manual

Page: 33 / 205

23
1-4-9. Using the Terminal Cover (PEL -011)
Description The rear panel terminal cover should be used to prevent
electric shock. The rear panel terminal covers should
always be used when connecting a load to the rear panel
terminals. As the front panel and rear panel terminals are
physically connected, the terminal cover should also be
used as a safety measure when a power source is
connected to the front terminals
Caution
Ensure the power is off before making any connections to
the LSG-H Series.
Note
:
In the following diagrams, the cable wiring is not
shown for clarity.
Steps(1/2) 1. Remove the screw holding the top cover to the
bottom cover.
1
2. Line-up the bottom covers with the notches in the
output terminals.
3. Place the top terminal cover over the bottom cover.
2
3