TEXIO LSG-1050H, Instruction Manual

Page: 198 / 205

188
7-7-10. Soft Start
Operation Mode
CC,CR
Selectable Time Range
OFF, 1~ 200ms / Res: 1ms
Time Accuracy
±(30%of set + 100us)
7-7-11. Remote Sensing
Voltage that can be Compensated
2V for a single line
7-7-12. Protection Function
Model LSG-175H LSG-350H LSG-1050H
Overvoltage protection(OVP)
Turns off the load at 110% of the rated voltage
Overcurrent protection(OCP)
0.0060A ~
9.6252A 0.0120A ~
19.2504A 0.050A ~
57.750A
or 110% of the maximum current of each range
Load off or limit selectable
Overpower protection(OPP)
0.10W ~ 192.50W 0.10W ~ 385.00W 1.00W ~ 1155.00W
or 110% of the maximum power of each range
Load off or limit selectable
Overheat protection(OTP)
Turns off the load when the heat sink temperature reaches
105°C
(
LSG-2100SH
：
115°C
).
Under voltage protection(UVP)
Turns off the load when detected. Can be set in the range of
OFF, 0.1V to 840V or Off.
Reverse connection protection(RVP)
By diode. Turns off the load when an alarm occurs.
Rating overcurrent protection (R.OCP)
An R.OCP message will be produced when the input current
range is greater than 110% of the rated operating current
range (I range).
Rating overpower protection (R.OPP)
An R.OPP message will be produced when the input power
range is greater than 110% of the rated operating power
range.