TEXIO LSG-1050H, Instruction Manual

Page: 104 / 205

94
3-2-3. Create a Program Chain
Note
Before creating a program chain, make sure a number of
programs have already been saved. These will be used
to create the program chain.
Chain Setting
Display Overview
Select
Start
LOAD RS232
01/Oct/2017
Off
P03 Off
P02 Off
P04
P01
Start
Off
P01
Program Chain Set
Starting program
for the chain
Recall
Default
Previous
Menu
Operation
1. Press
FUNC
> Program [F1] > Chain [F2] in order.
If they were not created in the current session, it may
be necessary to load the programs from Setup
memory.
2. Press Select Start [F1] and select which program will
be used to start the program chain.
Start: P01 ~ P16
3. Select P01 and choose which program will be linked
to P01.
Selecting OFF will end the chain after P01.
Selecting P01 will create an infinite chain.
Chains need not be linked in sequential order.
P01: OFF, P01 ~ P16
4. Repeat step 3 for any remaining programs in the
chain.
5. Press Save to save the program chain to internal
memory.
Pressing Recall Default [F4] will reset the chain to the
default settings. See page 163 (
7-3. LSG-H Series Default
Settings
) for details.
Recall Default [F4] will essentially clear the program
chain.