TEXIO FGX-2220, Instruction Manual

Page: 25 / 229

12
Input: N/A
3.
Press the Freq/Rate
key, followed by 1 + kHz
(F4).
FREQ/Rate
1
kHz
4.
Press the MOD key,
select FSK (F3), FSK
Rate (F3).
MOD
FSK FSK Rate
5.
Press 1 + 0 + Hz (F2).
1 0
Hz
6.
Press the MOD key,
select FSK (F3), Hop
Freq (F2).
MOD FSK Hop Freq
7.
Press 1 + 0 + 0 + Hz
(F3).
1 0 0
Hz
8.
Press MOD, FSK (F3),
Source (F1), INT (F1).
MOD FSK Source
INT
9.
Press the output key.
OUTPUT
2-4-4. PM Modulation
Example: PM modulation. 800Hz sinusoidal carrier wave. 15 kHz modulating
sine wave. 50˚ phase deviation. Internal Source.
Output:
50
Ω
CH1
1.
Press Waveform and
select Sine (F1).
Waveform Sine
2.
Press the MOD key and
select PM (F4).
MOD PM
Input: N/A 3.
Press the Freq/Rate
key, followed by 8 + 0 +
0 + Hz (F3).
FREQ/Rate
8 0 0
Hz
4.
Press the MOD key,
select PM (F4), Shape
(F4), Sine (F1).
MOD PM Shape
Sine
5.
Press MOD, then PM
(F4), PM Freq (F3).
MOD PM PM Freq
6.
Press 1 + 5 + kHz (F3).
1 5
kHz
7.
Press MOD, PM (F4),
PM Dev (F2).
MOD PM PM Dev
8.
Press 5 + 0 + Degree
(F1).
5 0
Degree
9.
Press MOD, PM (F4),
Source (F1), INT (F1).
MOD PM Source
INT
10.
Press the Output key.
OUTPUT