24
5. Result
High
If the 2
nd
display shows High, the
result is above the High limit.
Digital I/O: FAIL Out (Pin 6) and HIGH Limit FAIL Out (Pin
7) are activated.
Low
If the 2
nd
display shows Low, the
result is below the Low limit.
Digital I/O: FAIL Out (Pin 6) and LOW Limit FAIL Out (Pin
8) are activated.
Pass
If the 2
nd
display shows Pass, the
result is staying between the High
and the Low limit.
Digital I/O: PASS Out (Pin 5) is activated.
Digital I/O
The Compare measurement result comes out
from the rear panel Digital I/O terminal. For the
terminal details, see page33.
Deactivate
Compare
measurement
To cancel the Compare measurement, press the Shift key
followed by the HOLD (Comp) key, or simply activate
another measurement.
3-12. Math Measurement
Applicable to
( )
+
DCV
ACI
DCI
2/4W
ACV
Hz/P
TEMP
( )
+
Background
Math measurement runs three types of mathematical operation, MX+B, 1/X, and
percentage, based on the other measurement results.
Math type
MX+B
Multiplies the reading (X) by the factor (M) and
adds/subtracts offset (B).
1/X
Divides the reading (X) by 1, which provides the inverse
number.
Percentage
Runs the following equation.
(ReadingX
– Reference)
x 100%
Reference
3-13. Measure MX+B
1. Activate MX+B
Press the Shift key followed by the 2/4W (Math)
key. The MX+B setting appears.
2. Set the factor (M)
1st display
Shows the factor (M)
2nd display
Indicates MX+B (The letter M flashes)
