117
[SENSe:]ZERO:AUTO {OFF|ONCE|ON}
Disable or enable the auto zero mode. The OFF and ONCE have a similar effect. OFF mode
does not issue a new offset measurement until the multimeter goes to the
“WAIT
-FOR-
TRIGGER” state.
Parameter ONCE issues an immediate offset measurement.
[SENSe:]ZERO:AUTO?
Query the auto
zero mode. Returns “1”
(ON) or “0”
(OFF or ONCE).
B.6 The Math Operation Command
CALCulate:FUNCtion {PERCent|AVERage|NULL|LIMit|MXB|DB|DBM}
Select the math function. Only one function can be enabled at a time. The default function is
percent.
CALCulate:FUNCtion?
Query the present math function. Returns PERC, AVER, NULL, LIM, MXB, DB or DBM.
CALCulate:STATe {OFF|ON}
Disable or enable the selected math function.
CALCulate:STATe?
Query the state of the math function. Returns “0”(OFF) or “1”(ON).
CALCulate:PERCent:TARGet {
<value>
|MINimum|MAXimum}
Set the target value for percent math function. The multimeter clears the value when Min/Max
is turned on, when the power has been off or a remote interface reset.
CALCulate:PERCent:TARGet? [MINimum|MAXimum]
Query the target value for percent math function.
CALCulate:AVERage:MINimum?
Read the minimum value found during the Min/Max operation. The multimeter clears the value
when Min/Max is turned on, when the power has been off or a remote interface reset.
CALCulate:AVERage:MAXimum?
Read the maximum value found during the Min/Max operation. The multimeter clears the value
when Min/Max is turned on, when the power has been off or a remote interface reset.
CALCulate:AVERage:AVERage?
Read the average value of all readings taken since the Min/Max operation has been enabled.
The multimeter clears the value when Min/Max is turned on, when the power has been off or a
remote interface reset.
