118
4. Applications
4-1. Overview
Background
The APP function allows different software
applications to be run. The DCS-1000B comes
pre-installed with a number of apps.
Included
Applications
Go/No-Go
The Go/No-Go application can be
used to set threshold boundaries
for input signals. Go/No-Go tests
to see if a waveform will fit inside a
user-specified maximum and
minimum amplitude boundary
(template).
Mount Remote
Disk
This app allows the scope to
mount a network share drive.
Optional Apps
DVM
The DVM application displays a
digital voltage meter readout that
floats on the top left-hand side of
the screen.
Data Log
The Data Log app will log
waveform data and/or screenshots
at set intervals for set duration of
time.
Digital Filter
Adds a digital low or high filter to
any of the input channels. Each
filter can have a user-defined
cutoff frequency set.
Optional app must be installed, Please See Page
151.
4-2. Running Applications
Background
The APP function can host a number of different
applications that can be downloaded from the GW
Instek website.
Panel Operation 1. Press the
APP
key.
APP
2. Press
APP
from the bottom menu.
3. Scroll through each application using the
Variable
knob.
