Texecom Premier Elite 32XP-W, Installation Manual, Page: 20 / 32

Premier Elite 8XP-W & 32XP-W Installation Manual
20 INS467-8
7. Ricochet Diagnostics
Premier Elite 8XP-W & 32XP-W V3.XX
Diagnostic information is provided at the expander using the power and learn LED’s. On the 32XP -W the 8
LED’s using a logical OR function showing information for 2 devices per LED.
Green Power LED Slow Flash = Learning Fast Flash = Device/s being updated by panel
Bank of 8 LED’s
These show the zone status of the first 8 zone pairs. LED1 shows the logical OR status of Zone 1 & 2, LED2
shows the logical OR status of Zone 3 & 4, etc.
LED Status
Off Secure
On Alarm
Slow Flash Trouble
Fast Flash Alarm & Trouble
Blink Poll Error
Premier Elite V2.XX & later
Engineer Utilities now includes a new Ricochet Diagnostics menu. This menu displays information about the
live system, and is split into Premier Elite SmartKey™ and Ricochet devices via Zones and Users.
Devices
For Devices the following information can be viewed:-
 Routing
 RSSI
 Alarms and Status

Device visibility
 Time since last message

The 
/
 key can be used ti move between the options for each Zone.
Premier Elite SmartKey™
For Premier Elite SmartKey™ the following information can be viewed: -

Routing

RSSI
 Premier Elite SmartKey™ Button
 Status
Interpreting Keypad Displays
Routing
The image below shows that Zone 009 is routing through 14 and then 7 to the expander, for Premier Elite
SmartKey™ this may vary depending on where & when the reading is taken. If question marks appear in the
display it means the information is not available.
Zone 00 PR
->04->007->P