Texecom PREMIER 168, Installation Manual

Page: 136 / 152

Engineer Utilities Premier Elite Series Installation Manual
136 INS176-15
Print Log Data
E o elec:
Enginee Uils
Enginee Uils
in og aa
e o Eens:
 
e o Eens:
 
Enginee Uils
ie Een og
y

y

y
This option allows the ‘Event Log’ to be printed to a standard RS232
printer (see page 47 for details).
Soak Test Areas 24/48/64/88/168
E o elec:
Enginee Uils
Enginee Uils
oa es eas
oa es eas:
  <
oa es eas:
  <
Enginee Uils
ie Een og
y

y
2
y
When an area is selected for soak test, the soak test timer is started.
Any zones in the selected area with the soak test attribute will be put
on soak test for the duration of the soak test timer (see page 69). If
the area soak test option is subsequently deselected before the end
of the test, all zones are returned to normal operation.
When a zone is on soak test, it will not cause an alarm when
activated. However the system will log the event and will notify the
user that the zone has failed soak test.
A test failure will not prevent the user arming the system and will be
cleared when the engineers code is entered.
At the end of the soak test all zones that have passed the test will be
returned to normal operation.
Soak Test Areas 640
E o elec:
Enginee Uils
Enginee Uils
oa es eas
oa es eas
<
oa es eas
EH<
Enginee Uils
ie Een og
y

y
y
A
C P
oa es eas
<
When an area is selected for soak test, the soak test timer is started.
Any zones in the selected area with the soak test attribute will be put
on soak test for the duration of the soak test timer (see page 69). If
the area soak test option is subsequently deselected before the end
of the test, all zones are returned to normal operation.
When a zone is on soak test, it will not cause an alarm when
activated. However the system will log the event and will notify the
user that the zone has failed soak test.
A test failure will not prevent the user arming the system and will be
cleared when the engineers code is entered.
At the end of the soak test all zones that have passed the test will be
returned to normal operation.