6.2
Adding LUNs
The RamSan allows the administrator to add LUNs through the Text
Management Interface and the web interface.
6.2.1
Via Web Interface
To add LUN(s) via the web interface:
•
Click on the “Management Control Processor” graphic
•
Click on the “LUN Config” tab
•
Click the “New LUN” button
•
Select a “LUN number” from the drop-down box
•
Enter the “Device ID” (used only as an OpenVMS specific
device identifier)
•
Adjust the “LUN size” using the scroll bar
•
Assign links to FC ports (see Section 6.3 – Linking LUNs to/from
Fibre Channel Controllers)
•
Assign LUN masks (see Section 6.7 – Managing Access Lists)
•
Set backup mode (see Section 6.9 – Setting Backup Mode)
•
Click the “OK” button
•
The system adds the specified LUN.
Figure 6-3: Adding LUNs via the Web Interface
RamSan-120
User’s Manual
- 59 -
