Texas Instruments TUSB1004EVM User Manual Download Page 1

User’s Guide

TUSB1004EVM User's Guide

ABSTRACT

The TUSB1004 is a 10 Gbps USB 3.2 quad channel linear redriver for USB Type-A applications. This 
doducment goes over how to use and configure the TUSB1004EVM as well as recommendations for system 
hardware implementation is described in this document. These recommendations are only guidelines and it is 
the designer’s responsibility to consider all system characteristics and requirements. Engineers should refer to 
the data sheet for technical details such as device operation, terminal description, and so forth.

Table of Contents

1 Overview

..................................................................................................................................................................................

2

1.1 What is the TUSB1004EVM?.............................................................................................................................................

2

1.2 What is Included in the TUSB1004EVM?..........................................................................................................................

2

1.3 What Does the EVM Look Like?........................................................................................................................................

2

2 Hardware Configuration

.........................................................................................................................................................

3

2.1 Power.................................................................................................................................................................................

3

2.2 Configuration Jumpers.......................................................................................................................................................

3

2.3 CEQ Configuration.............................................................................................................................................................

5

2.4 SSEQ Configuration...........................................................................................................................................................

5

2.5 Local I2C Access...............................................................................................................................................................

6

3 Quick Start Guide

....................................................................................................................................................................

7

4 Schematics

..............................................................................................................................................................................

8

Trademarks

All trademarks are the property of their respective owners.

www.ti.com

Table of Contents

SLLU351 – APRIL 2022

Submit Document Feedback

TUSB1004EVM User's Guide

1

Copyright © 2022 Texas Instruments Incorporated

Summary of Contents for TUSB1004EVM












Reviews: