![background image](http://html1.mh-extra.com/html/texas-instruments/trf3762-evm/trf3762-evm_user-manual_1097033001.webp)
1
Hardware Setup
User's Guide
SLWU056 – June 2008
TRF3762 EVM User's Guide
Contents
1
Hardware Setup
2
Software Setup
Appendix A
Synthesizing Desired Frequencies
.............................................................................
Appendix B
Output Configuration Options
...................................................................................
Appendix C
TRF3762 QFN Installation Using a Hakko Hot Air Rework Station
........................................
List of Figures
1
Single Output Without Balun
..............................................................................................
List of Tables
1
Required Test Hardware
....................................................................................................
This manual can help users to operate the TRF3762 evaluation module (EVM) with the supplied software.
The required hardware for testing the EVM is listed in
.
Table 1. Required Test Hardware
Hardware
Specifications
Units
Power supply (1)
4.5 to 5.2
V
Spectrum analyzer (1)
0 to 6 Spurs
GHz
–160 resolution (phase noise)
dBm
Agilent’s 5052 (1)
Low phase noise reference source (1)
1 kHz
–120.22
dBc
100 kHz
–145.6
590 kHz
–158
1 MHz
–158
3 MHz
–160
5 MHz
–161
Rms jitter
236.69
ps
Personal computer (PC) (1)
2-GHz processor, CD drive, Parallel port
Power cable (1)
Supplied by Texas Instruments
Parallel-to-parallel connector cable(1)
Not supplied by Texas Instruments
DB25 to DB25
Coaxial cable (2)
50
Ω
X-ACTO is a trademark of Elmer's Products, Inc..
LabVIEW is a trademark of National Instruments Corporation.
SLWU056 – June 2008
TRF3762 EVM User's Guide
1