How to Get Started
13
SLVUBM2B – April 2019 – Revised December 2019
Copyright © 2019, Texas Instruments Incorporated
TPS929120EVM User's Guide
Figure 15. TPS929120EVM GUI Advanced Page
3.4.5
EEPROM Programming Page
The device supports two programming modes for different applications: either with chip select or external
address select.
shows the EEPROM programming page. The programming mode is set as the
method you have configured during sync-up process, which can also be toggled through clicking one of
the programming buttons. All EEPROM registers value can be set on this page. All the configured values
are copied to corresponding shadow registers firstly. After clicking "Start Programming" button, all the
shadow registers values overwrites all related EEPROM registers, which means that only after clicking
"Start Programming" button all the current configuration value really overwrites the corresponding
EEPROM registers. Clicking "Load Default" button sets all current registers with default value as showed
in datasheet. The current register configuration can be saved for future reuse.
Jumping to other pages from the programming page or clicking "Exit PROG mode" button will
automatically force the device exit EEPROM programming mode through clearing CONF_STAYINEEP
method, which means the newly modified EEPROM registers value will not update to corresponding
configuration registers after exiting EEPROM programming mode. CLR_REG can be set through register
map page to update configuration registers with the latest EEPROM registers value immediately. For other
detailed operation instructions, see the walkthrough wizard of this page.
