4.5 Software Operation
This section provides descriptions of the EVM software.
The supplied software is used to communicate with the TPS65400 EVM. Click on the icon on the host computer
to start the software. The software displays the main control panel to connect with the EVM board.
1. Click on
Rescan Slaves
2. Click on
LM26430-00F1 6a
3. Click the
No
button on the popup dialog
Figure 4-3. Connect to TPS65400 EVM with EVM GUI
4. Click on
PMBus Register Page
Figure 4-4. Go to Main Setting Panel
Bench Test Setup Conditions
10
TPS65400 Buck Converter Evaluation Module User's Guide
SLVUAC4A – OCTOBER 2014 – REVISED MAY 2021
Copyright © 2021 Texas Instruments Incorporated