Texas Instruments TPS544 20 Series, User Manual

Page: 23 / 43

After making changes to one or more configurable parameters, the changes can be committed to nonvolatile
memory by selecting
Store User Defaults . This action prompts a confirm selection pop-up, and if confirmed, the
changes are committed to nonvolatile memory ( Figure 8-12 ).
Figure 8-12. Configure- Store User Defaults
In the lower left corner, the different view screens can be changed. The view screens can be changed between
Configure , Monitor and Status as needed ( Figure 8-13 ).
Figure 8-13. Change View Screen to Monitor Screen
www.ti.com Screen Shots
SLUUAY7B – MAY 2014 – REVISED AUGUST 2021
Submit Document Feedback
TPS544x20 Step-Down Converter Evaluation Module User's Guide 23
Copyright © 2021 Texas Instruments Incorporated