Texas Instruments TPS2663-166EVM, User Manual, Page: 4 / 17

Connector, Jumper, and LED Descriptions
www.ti.com
4 SLVUBQ5A – August 2019 – Revised October 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
TPS2663-166EVM: Evaluation Module for TPS2663xPWP and TPS1663xPWP
4 Connector, Jumper, and LED Descriptions
4.1 Input and Output Connector Description
Table 2. Input and Output Connector Description
Connector Label Description
T1 VIN1 Power input connector for connecting the power supply for CH1 (TPS26633)
T2 VOUT1 Power output connector for connecting the load for CH1 (TPS26633)
T3 VIN2 Power input connector for connecting the power supply for CH2 (TPS16630)
T4 VOUT2 Power output connector for connecting the load for CH2 (TPS16630)
4.1.1 Test Points Description
Table 3. Test Points Description
Test Points Label Description
For CH1 (TPS26633)
TP1 VIN1 Positive voltage input for CH1
TP2 VOUT1 Positive voltage output for CH1
TP3 PGOOD1 Power good output for CH1
TP4 VIN_SYS1 IN_SYS supply for CH1
TP5 FLTb1 FLT signal output for CH1
TP6 IMON1 Current monitoring signal for CH1
TP7 PWR_GND Input power ground signal for CH1
TP8 SIG_GND Signal ground for CH1
TP9 PWR_GND Output power ground for CH1
TP10 SHDNb1 Shutdown input signal for CH1
For CH2 (TPS16630)
TP11 VOUT2 Positive voltage output for CH2
TP12 PGOOD2 Power good output for CH2
TP13 VIN2 Positive voltage input for CH2
TP14 FLTb2 FLT signal output for CH2
TP15 IMON2 Current monitoring signal for CH2
TP16 PWR_GND Input power ground signal for CH2
TP17 SIG_GND Signal ground for CH2
TP18 PWR_GND Output power ground for CH2
TP19 SHDNb2 Shutdown input signal for CH2